Horário de atendimento: Segunda a sexta, das 9h às 18h.
CHARX T1HBI12-1AC80DC250-8,0M1 - CHARX T1HBI12-1AC80DC250-8,0M1 1360816 PHOENIX CONTACT CHARX connect universal, Vehicle charging input, for ..
Em estoque Produto em alta

CHARX T1HBI12-1AC80DC250-8,0M1

CHARX T1HBI12-1AC80DC250-8,0M1 1360816 PHOENIX CONTACT CHARX connect universal, Vehicle charging input, for ..

$1,363.40 USD
48 em estoque
Especificações principais
: for installation in electric vehicles (EV)
Depth: 117.6 mm
Width: 117.6 mm
Coding: 2.7 kΩ (between PE and CS)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
for installation in electric vehicles (EV)
Depth 117.6 mm
Width 117.6 mm
Coding 2.7 kΩ (between PE and CS)
Height 90 mm
Number 5 (L1, N, PE, DC+, DC-)
General A protective cap is supplied as standard for the DC and AC contacts.
Altitude 4000 m (above sea level)
Cable type Single wires
Resistance max. 1200 Ω ±5 K
Technology Combined Charging System
Application for charging with alternating current (AC) and with direct current (DC)
Sensor type PTC chain
Cable length 8 m
Product type Vehicle charging inlet
Charging mode Mode 2, 3, 4
Fixing screws M6
Mounting type Front and rear mounting (0 to 90 degree frontal inclination possible)
Rated current 80 A AC
Rated voltage 250 V AC
Charging power 20 kW
Product family CHARX connect universal
Cable structure 2 x 16 mm²
Color (Housing) black (9005)
Insertion force < 100 N
Attachment point Sensor for the AC contacts
Cable resistance ≤ 1.16 Ω/km
Charging current 80 A
Lock recognition available
Withdrawal force < 100 N
Charging standard CCS type 1
Cross section AWG (converted acc. to IEC)
Operating voltage 12 V
Material (Housing) Plastic
Single wire, color OG
Ambient temperature -40 °C ... 130 °C (Operation)
Color (Mating face) black (9005)
Insulation resistance > 200 MΩ
Single wire, material Silicone
Standards/regulations DIN˽EN 60738-1
Mounting hole diameter 6.70 mm (ø)
Temperature monitoring AC contacts: PTC chain (DIN˽EN˽60738-1)
External cable diameter 9.9 mm ±0.3 mm
Temperature measurement DC contacts: 2x PT1000 (DIN EN 60751)
Note number of positions 4-pos.
Type of charging current AC single-phase
Material (Contact surface) Silver
Measuring range_resistance 790 Ω ... 1420 Ω
Single wire, cross section 95.00 mm²
Insertion/withdrawal cycles > 10000
Recommended adaptation time 600 ms
Type of signal transmission Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121
Mechanical emergency release available
Reverse current of the motor max. 1.5 A
Note on the connection method Crimp connection, cannot be disconnected
Service life insertion cycles > 10000 load cycles
Ambient temperature (operation) -40 °C ... 80 °C
Position of the locking actuator top center
Typical motor current for locking 0.25 A
Pause time after entry or exit path 3 s
Max. dwell time with reverse current 1 s
Maximum voltage for locking detection 12 V
Ambient temperature (storage/transport) -40 °C ... 85 °C
Possible power supply range at the motor 9 V ... 16 V
Screws included in the scope of delivery none
Degree of protection (Vehicle charging inlet) IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products)

Descrição do produto

CHARX connect, Vehicle input, Locking actuator above, for charging with alternating current (AC) and with direct current (DC), for installation in electric vehicles (EV), Combined Charging System, CCS
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top