Horário de atendimento: Segunda a sexta, das 9h às 18h.
EV-CC-AC1-M3-CBC-RCM-ETH - EV-CC-AC1-M3-CBC-RCM-ETH 1018701 PHOENIX CONTACT AC charging controller
Em estoque Produto em alta

EV-CC-AC1-M3-CBC-RCM-ETH

EV-CC-AC1-M3-CBC-RCM-ETH 1018701 PHOENIX CONTACT AC charging controller

$0.00 USD
3418 em estoque
Especificações principais
: Client
Housing: DIN 43880
Altitude: < 2000 m
Interface: Ethernet (1x)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
Client
Housing DIN 43880
Altitude < 2000 m
Interface Ethernet (1x)
Bus system RS-485
Application AC charging controller for private and commercial applications (EU/CN)
Conformance CE-compliant
Output name 4 digital outputs
Product type AC charging controller
Charging mode Mode 3, Case B + C
Mounting type DIN rail mounting
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2
Operating mode Stand-Alone
Product family CHARX control advanced plus
Status display 5 x LEDs
Supply voltage 230 V
Frequency range 50 Hz ... 60 Hz
Article revision 01
Rated current In 32 A (Three-phase, 4x6 mm²)
Connection method Connector
Mounting position any
Power consumption < 10 W
Nominal current IN ≤ 4 mA
Rated frequency fn ≤ 2000 Hz
Current consumption < 3 W (No-load)
Input voltage range 0 V ... 3 V (Off)
Protocols supported Modbus/RTU (Master)
Transmission length 100 m
Degree of protection IP20
Number of interfaces 1 (for energy measurement device and RFID reader)
Overvoltage category II
Supply voltage range 100 V AC ... 240 V AC (nominal voltage range)
Connection technology Screw connection
Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC
Residual current IΔn 30 mA (AC)
Standards/regulations IEC 61851-1
Input voltage range U2 9 V ... 15 V (On)
Max. switching current 16 A
Maximum output current 0.2 A (Total current for all outputs; internally supplied)
Maximum output voltage 30 V
Tripping time for IΔn < 180 ms
Description of the input Digital input
Nominal input voltage UN 12 V
Number of digital inputs 5
Transmission speed range 4.8 kbps ... 115.2 kbps (adjustable)
Tripping time for 5xIΔn < 20 ms
Type of charging current AC
Maximum switching voltage 250 V AC (External supply)
Nominal power consumption < 3 W (No-load)
Number of charging points 1
Serial transmission speed 10/100 Mbps
Diameter of measuring coil 15 mm
Minimum switching capacity 4000 VA
Response time for 2 x IΔn < 70 ms
Conductor cross section AWG 24 ... 12
Number of supported devices 2
Nominal differential current ± 300 mA
Conductor cross section rigid 0.2 mm² ... 4 mm²
Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU
Ambient temperature (operation) -25 °C ... 60 °C
Conductor cross section flexible 0.2 mm² ... 2.5 mm²
Permissible humidity (operation) 30 % ... 95 % (non-condensing)
Immunity to electromagnetic fields EN 61 000-4-3, 80---1000 MHz, 10 V/m
Maximum output current per channel 0.6 A (Per output; externally supplied)
Immunity to fast transients (Burst) EN 61 000-4-4: 2 kV AC mains input, 1 kV data cable
Immunity to conducted high frequency EN 61 000-4-6, 0.15...80 MHz, 10 V
Ambient temperature (storage/transport) -40 °C ... 85 °C
Locking release in the event of mains failure Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet
Immunity to the discharge of static electricity EN 61000-4-2: 8 kV air, 4 kV contact discharge

Descrição do produto

AC load control system according to IEC 61851-1, Client or Stand-Alone, Modbus-TCP via Ethernet, connection to RFID reader and energy meter via RS-485, DC leakage current monitoring, male connector un
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top