Em estoque Produto em alta
FL WLAN 1100
FL WLAN 1100 2702534 PHOENIX CONTACT Wireless module
$0.00
USD
4808 em estoque
Especificações principais
:
Recommended ferrule: connection length 10 mm
Gain:
5 dBi
Note:
Degree of protection when installed
Type:
Stand-Alone
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Recommended ferrule: connection length 10 mm | |
| Gain | 5 dBi |
| Note | Degree of protection when installed |
| Type | Stand-Alone |
| Color | black |
| Depth | 113.2 mm |
| Width | 62.8 mm |
| Height | 36.5 mm |
| Number | 1 |
| Signal | ± 0.5 kV (symmetrical) |
| Voltage | 10 V |
| Comments | ±2.2 kV |
| Security | 802.11i |
| Designation | 1966101 FMC 1,5/ 3-STF-3,5 |
| Test result | Class B |
| Product type | Wireless module |
| Assembly note | Permanently installed |
| Configuration | Web-based management, automated CLI |
| Mounting type | Single-hole mounting |
| Frequency band | 2.4 GHz |
| Supply current | typ. 120 mA (at 24 V DC) |
| Supply voltage | 24 V DC (SELV) |
| Country support | Belgium |
| Frequency range | 80 MHz ... 1000 MHz |
| No. of channels | 1 (RJ45 ports) |
| Operating modes | Access Point / Client Adapter / Repeater |
| Article revision | 12 |
| Housing material | Polycarbonate, PC |
| Pollution degree | 2 |
| Stripping length | 10 mm |
| Connection method | Push-in spring connection |
| Contact discharge | ± 4 kV |
| Wireless licenses | Europe, additional countries in the e-shop |
| Wireless standard | WLAN |
| Indirect discharge | ± 6 kV |
| Note on dimensions | Outside dimensions |
| Transmission power | max. 20 dBm (EIRP) |
| Transmission speed | 10/100 Mbps |
| Current consumption | max. 250 mA (at 18 V DC) |
| Dimensional drawing | |
| Material base plate | Die-cast zinc, nickel-plated |
| Note on application | Only for industrial use |
| Number of positions | 3 |
| Test field strength | 10 V/m |
| Transmission length | 100 m (per segment) |
| Degree of protection | IP54 |
| Number of interfaces | 1 |
| Overvoltage category | none |
| Supply voltage range | 18 V DC ... 32 V DC (PELV/SELV) |
| Transmission physics | Copper |
| Connection technology | COMBICON |
| Standards/regulations | EN 61000-4-2 |
| Cross section range AWG | 24 ... 16 (Use copper wires rated 75° C (UL)) |
| Air pressure (operation) | 800 hPa ... 1080 hPa (up to 2000 m above sea level) |
| Quality of service (QoS) | Yes |
| Antenna connection method | (Internal) |
| Conductor cross section AWG | 24 ... 16 |
| Note on the connection method | Recommended conductor cross section: 0.75 mm² |
| Number of wireless interfaces | 1 IEEE 802. 11 a/b/g/n |
| Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
| Ambient temperature (operation) | 0 °C ... 60 °C |
| Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
| Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
| Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
| Wireless modules that can be connected | 10 (In Access Point mode max. 2 SSIDs) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
| Maximum power dissipation for nominal condition | 4.5 W |
Descrição do produto
WLAN access point, client with two internal antennas (MIMO) for single-hole mounting, IP54, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz (incl. DFS channels), connections: COMBICON 9 ... 32 V DC,
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
