Em estoque Produto em alta
HC-COM-Q4/2-I-CT-M-PL
HC-COM-Q4/2-I-CT-M-PL 1463388 PHOENIX CONTACT Contact insert, number of poles: 4+2+PE, size: COM, power cont..
$8.73
USD
1193 em estoque
Especificações principais
:
Can only be used in plastic housing
Type:
COM
Width:
26.3 mm
Height:
52.3 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Can only be used in plastic housing | |
| Type | COM |
| Width | 26.3 mm |
| Height | 52.3 mm |
| Length | 45.5 mm |
| Series | HC-COM |
| General | Connectors may be operated only when there is no load/voltage. |
| Application | Power/signal |
| Product type | Contact insert with a fixed no. of positions |
| Rated current | 40 A (power contacts) |
| Seal material | NBR |
| Contact diameter | 4 mm |
| Contact material | Copper alloy |
| Contact numbering | 1 - 4 (power contacts) |
| Tightening torque | 0.5 Nm ... 0.8 Nm (Mounting screws for mounting in the HEAVYCON housing) |
| Connection profile | 4+2+PE |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 6 |
| Rated surge voltage | 6 kV (Phase-phase power contacts) |
| Overvoltage category | III |
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Connection technology | Crimp connection (power contacts) |
| Contact material type | turned |
| No. of power contacts | 4 |
| Rated voltage (III/3) | 400 V (Phase-ground power contacts) |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Conductor cross section | 1.5 mm² ... 10 mm² (power contacts) |
| No. of control contacts | 2 |
| Contact carrier material | PC |
| Contact surface material | Ag (alternatively Au) |
| Insertion/withdrawal cycles | ≥ 500 |
| Connection cross section AWG | 16 ... 8 (power contacts) |
| Ambient temperature (operation) | -40 °C ... 125 °C (including heating up of contacts) |
| Connection in acc. with standard | IEC / EN |
| Rated voltage for power contacts | 400/690 V |
| Number of connections per position | 1 |
| Flammability rating according to UL 94 | V0 |
| Stripping length of the individual wire | 9 mm (for 1.5 ... 2.5 mm²) |
| Material of contact surface, power contact | Ag |
| Material of contact surface, control contact | Ag (alternatively Au) |
Descrição do produto
Contact insert, number of positions: 4+2+PE, size: COM, power contacts: 4, control contacts: 2, number of connections per position: 1, Pin, Crimp connection, 400 V, 40 A, 1.5 mm2 ... 10 mm2, applicati
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
