Em estoque Produto em alta
IB IL AO 1/SF-PAC
IB IL AO 1/SF-PAC 2861315 PHOENIX CONTACT Inline terminal
$0.00
USD
4160 em estoque
Especificações principais
:
4 mA ... 20 mA
Type:
modular
Depth:
71.5 mm
Width:
24.4 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| 4 mA ... 20 mA | |
| Type | modular |
| Depth | 71.5 mm |
| Width | 24.4 mm |
| Height | 135 mm |
| CCCex note | Use in potentially explosive areas is not permitted in China. |
| Output name | Analog output |
| Current draw | max. 40 mA |
| Product type | I/O component |
| ID code (hex) | 7D |
| Mounting type | DIN rail mounting |
| DAC resolution | 16 bit |
| ID code (dec.) | 125 |
| Operating mode | Process data mode with one word |
| Product family | Inline |
| Supply voltage | 7.5 V DC (via voltage jumper) |
| Connection name | Inline connector |
| Register length | 16 bit |
| Article revision | 20 |
| Pollution degree | 2 (IEC 60664-1, EN 60664-1) |
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Stripping length | 8 mm |
| Connection method | Inline data jumper |
| Length code (dec) | 01 |
| Length code (hex) | 01 |
| Number of outputs | 1 |
| Scope of delivery | including Inline connectors and marking fields |
| Input address area | 0 Byte |
| Note on dimensions | Housing dimensions |
| Protective circuit | Transient protection of outputs |
| Transmission speed | 500 kbps |
| Dimensional drawing | |
| Note on application | Only for industrial use |
| Output address area | 2 Byte |
| Process data update | < 1 ms |
| Degree of protection | IP20 |
| Diagnostics messages | Failure of or insufficient communications power ULI/O error message sent to the bus coupler |
| Number of interfaces | 2 |
| Overvoltage category | II (IEC 60664-1, EN 60664-1) |
| Process data channel | 16 bit |
| Supply voltage range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Connection technology | 2-conductor |
| Current output signal | 0 mA ... 20 mA |
| Voltage output signal | 0 V ... 10 V |
| Required parameter data | 4 Byte |
| Air pressure (operation) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| D/A converter resolution | 16 bit |
| Conductor cross section AWG | 28 ... 16 |
| Required configuration data | 4 Byte |
| Conductor cross section rigid | 0.08 mm² ... 1.5 mm² |
| Conductor cross section, rigid | 0.08 mm² ... 1.5 mm² |
| Ambient temperature (operation) | -25 °C ... 55 °C |
| Load/output load current output | < 500 Ω |
| Load/output load voltage output | > 2 kΩ |
| Representation of output values | 16-bit straight binary |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Conductor cross section flexible | 0.08 mm² ... 1.5 mm² |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Conductor cross section, flexible | 0.08 mm² ... 1.5 mm² |
| Test voltage: I/O/functional ground | 500 V AC, 50 Hz, 1 min. |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Note regarding the connection technology | shielded |
| Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
| Maximum power dissipation for nominal condition | 1.85 W |
| Test voltage: 7.5 V supply (bus logic), 24 V supply UANA/ I/O | 500 V AC, 50 Hz, 1 min. |
| Test voltage: 7.5 V supply (bus logic), 24 V supply UANA/ functional ground | 500 V AC, 50 Hz, 1 min. |
Descrição do produto
Inline, Analog output terminal, Analog output: 1, 0 V ... 10 V, 0 mA... 20 mA, 4 mA... 20 mA, connection technology: 2 conductors, transmission rate on the local bus: 500 kBit/s, protection rating: IP
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
