Em estoque Produto em alta
ICC25-PPC2,5/4-5,0-AA-6021
ICC25-PPC2,5/4-5,0-AA-6021 1475114 PHOENIX CONTACT Connector for printed circuit board, nominal section: 2.5..
$3.81
USD
2664 em estoque
Especificações principais
:
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Note:
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Pitch:
5 mm
Coding:
For details, refer to the product drawing in the “Downloads” tab.
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Pitch | 5 mm |
| Coding | For details, refer to the product drawing in the “Downloads” tab. |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 19.95 mm |
| Height [h] | 15 mm |
| Length [l] | 22 mm |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sweep speed | 1 octave/min |
| Locking type | without |
| Product type | PCB connector |
| No. of cycles | 25 |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Product family | ICC..-PPC2,5/..-5,0 |
| Thermal stress | 100 °C/168 h |
| Color (Housing) | green (6021) |
| Mounting flange | without |
| Contact material | Cu alloy |
| Corrosive stress | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Stripping length | 10 mm |
| Connection method | Push-in spring connection |
| Contact resistance | 1.56 mΩ |
| Nominal current IN | 16 A |
| Nominal voltage UN | 320 V |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 4 |
| Number of potentials | 4 |
| Rated voltage (II/2) | 630 V |
| Contact resistance R1 | 1.56 mΩ |
| Contact resistance R2 | 1.59 mΩ |
| Nominal cross section | 2.5 mm² |
| Number of connections | 4 |
| Rated voltage (III/2) | 320 V |
| Test duration per axis | 2.5 h |
| Contact connection type | Socket |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 4 kV |
| Tested number of positions | 4 |
| Conductor cross section AWG | 24 ... 16 |
| Insertion/withdrawal cycles | 25 |
| Rated surge voltage (III/2) | 4 kV |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (dependent on the derating curve) |
| Rated insulation voltage (II/2) | 630 V |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Rated insulation voltage (III/2) | 320 V |
| Power-frequency withstand voltage | 2.21 kV |
| Conductor/PCB connection direction | 0 ° |
| Withdraw strength per pos. approx. | 11 N |
| Insertion strength per pos. approx. | 12 N |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Impulse withstand voltage at sea level | 4.8 kV |
| Metal surface contact area (top layer) | Tin (4 - 8 µm Sn) |
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface terminal point (top layer) | Tin (4 - 8 µm Sn) |
| Insulation resistance, neighboring positions | > 1 TΩ |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 2.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.34 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Descrição do produto
PCB connector, nominal cross-section: 2.5 mm², colour: green, nominal current: 16 A, nominal voltage (III/2): 320 V, surface contacts: tin, contact type: female, number of potentials: 4, number of row
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
