Em estoque Produto em alta
MACX MCR-SL-CAC-5-I-UP
MACX MCR-SL-CAC- 5-I-UP 2810625 PHOENIX CONTACT Current transducers
$0.00
USD
3654 em estoque
Especificações principais
:
< 3.4 W (230 V AC)
Note:
When being exposed to interference, there may be minimal deviations.
Color:
gray (RAL 7042)
Depth:
114.5 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| < 3.4 W (230 V AC) | |
| Note | When being exposed to interference, there may be minimal deviations. |
| Color | gray (RAL 7042) |
| Depth | 114.5 mm |
| Width | 22.5 mm |
| Height | 104 mm |
| Ripple | < 10 mVPP(500 Ω / 20 mA) |
| Altitude | ≤ 2000 m |
| Comments | Criterion A |
| EMC note | EMC: class A product, see manufacturer's declaration in the download area |
| Curve type | Sine |
| Certificate | CE-compliant |
| Product type | Current transducer |
| Screw thread | M3 |
| Test voltage | 4 kV AC (50 Hz, 60 s) |
| Mounting type | DIN rail mounting |
| Identification | II 3 G Ex nA IIC T4 Gc X |
| Noise emission | EN 61000-6-4 |
| Noise immunity | EN 61000-6-2 |
| Status display | LED red (error), LED green (ready) |
| Surge strength | 20 x IN(1 s) |
| Input impedance | < 50 mΩ |
| Article revision | 14 |
| Housing material | Polyamide PA non-reinforced |
| Non-load voltage | 15 V |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Overload capacity | 2 x IN (continuous) |
| Power consumption | < 0.8 W (24 V DC) |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Protective circuit | Surge protection; 35 V suppressor diode |
| Input current range | 0 A AC ... 1 A AC (configurable) |
| Degree of protection | IP20 |
| Nominal frequency fN | 50 Hz |
| Overvoltage category | III |
| Supply voltage range | 19.2 V AC/DC ... 253 V AC/DC |
| Voltage input signal | ≤ 300 V AC |
| Current output signal | 0 mA ... 20 mA (configurable) |
| Standards/regulations | EN 61000-4-2 |
| Limit frequency (3 dB) | approx. 3 Hz |
| Step response (10-90%) | ≤ 300 ms |
| Max. current consumption | < 33 mA (24 V DC) |
| Rated insulation voltage | 300 V AC (to earth) |
| Configurable/programmable | Via DIP switches |
| Frequency measuring range | 45 Hz ... 65 Hz |
| Max. current output signal | 25 mA |
| Maximum transmission error | ≤ 0.5 % (of nominal range value under nominal conditions) |
| Conductor cross section AWG | 24 ... 14 |
| Reverse polarity protection | yes |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Electromagnetic compatibility | Conformance with EMC directive |
| Ambient temperature (operation) | -20 °C ... 65 °C |
| Load/output load current output | < 500 Ω (20 mA) |
| Maximum temperature coefficient | < 0.02 %/K |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
| Temperature coefficient, typical | < 0.015 %/K |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C (-40 °F ... 185 °F) |
| Maximum power dissipation for nominal condition | < 0.9 W (24 V DC) |
Descrição do produto
Current converter for 1 A and 5 A AC, output signal 0...20 mA or 4...20 mA, configurable via DIP switch with LED service status signalling
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
