Em estoque Produto em alta
MCV 1,5/ 9-G-3,5 THTPIN26R56
MCV 1,5/ 9-G-3,5 THTPIN26R56 1717440 PHOENIX CONTACT PCB base housing, nominal cross-section: 1.5 mm², colou..
$2.54
USD
3987 em estoque
Especificações principais
Note:
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:
Component suitable for through hole reflow
Pitch:
3.5 mm
Result:
Test passed
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | Component suitable for through hole reflow |
| Pitch | 3.5 mm |
| Result | Test passed |
| Process | Reflow/wave soldering |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| ESD level | (D) electrostatically conductive |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 32.9 mm |
| Height [h] | 11.8 mm |
| Length [l] | 7.25 mm |
| Pin layout | Linear pinning |
| Sweep speed | 1 octave/min |
| Product type | PCB headers |
| Hole diameter | 1.4 mm |
| Mounting type | THR soldering |
| No. of cycles | 25 |
| Specification | IEC 60512-1-1:2002-02 |
| Number of rows | 1 |
| Product family | MCV 1,5/..-G-THT |
| Thermal stress | 100 °C/168 h |
| [W] tape width | 56 mm |
| Color (Housing) | black (9005) |
| Mounting flange | no |
| Contact material | Cu alloy |
| Corrosive stress | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Installed height | 9.2 mm |
| Type of packaging | 56 mm wide tape |
| [A] coil diameter | 330 mm |
| Contact resistance | 1.7 mΩ |
| Nominal current IN | 8 A |
| Nominal voltage UN | 160 V |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 9 |
| Outer packaging type | Dry bag |
| Rated voltage (II/2) | 250 V |
| Contact resistance R1 | 1.7 mΩ |
| Contact resistance R2 | 1.6 mΩ |
| Rated voltage (III/2) | 160 V |
| Rated voltage (III/3) | 160 V |
| Solder pin length [P] | 2.6 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Moisture Sensitive Level | MSL 3 |
| Insulating material group | IIIa |
| CTI according to IEC 60112 | 250 |
| Rated surge voltage (II/2) | 2.5 kV |
| Tested number of positions | 20 |
| Insertion/withdrawal cycles | 25 |
| Rated surge voltage (III/2) | 2.5 kV |
| Rated surge voltage (III/3) | 2.5 kV |
| Solder cycles in the reflow | 3 |
| [W2] coil overall dimension | 62.4 mm |
| Classification temperature Tc | 260 °C |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 100 °C (dependent on the derating curve) |
| Rated insulation voltage (II/2) | 250 V |
| Rated insulation voltage (III/2) | 160 V |
| Rated insulation voltage (III/3) | 160 V |
| minimum creepage distance (II/2) | 2.5 mm |
| Power-frequency withstand voltage | 1.39 kV |
| minimum creepage distance (III/2) | 1.6 mm |
| minimum creepage distance (III/3) | 2.5 mm |
| Withdraw strength per pos. approx. | 5 N |
| Insertion strength per pos. approx. | 7 N |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Impulse withstand voltage at sea level | 2.95 kV |
| Metal surface contact area (top layer) | Tin (3 - 5 µm Sn) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 250 |
| Metal surface soldering area (top layer) | Tin (3 - 5 µm Sn) |
| Metal surface contact area (middle layer) | Nickel (1.3 - 3 µm Ni) |
| Contact holder in insertRequirements >20 N | Test passed |
| Metal surface soldering area (middle layer) | Nickel (1.3 - 3 µm Ni) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| minimum clearance value - non-homogenous field (II/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/3) | 1.5 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
Descrição do produto
PCB headers, nominal cross section: 1.5 mm2, color: black, nominal current: 8 A, rated voltage (III/2): 160 V, contact surface: Tin, contact connection type: Pin, number of rows: 1, number of position
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
