Horário de atendimento: Segunda a sexta, das 9h às 18h.
PSR-SPP-24DC/URM4/5X1/2X2 - PSR-SPP-24DC/URM4/5X1/2X2 1442026 PHOENIX CONTACT Extension of 1 or 2 channel contacts, 5 normally open cont..
Em estoque Produto em alta

PSR-SPP-24DC/URM4/5X1/2X2

PSR-SPP-24DC/URM4/5X1/2X2 1442026 PHOENIX CONTACT Extension of 1 or 2 channel contacts, 5 normally open cont..

$282.54 USD
73 em estoque
Especificações principais
: 250 V
Depth: 114.5 mm
Shock: 15g
Width: 35 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico

Especificações técnicas

Parâmetro Valor
250 V
Depth 114.5 mm
Shock 15g
Width 35 mm
Height 112 mm
Category 4 (In conjunction with suitable evaluating device)
pluggable yes
Relay type Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3
Application Extension module
Output fuse 10 A gL/gG
Product type Safety relays
Mounting type DIN rail mounting
Recovery time < 1 s
Stop category 0
Identification CE-compliant
Inrush current min. 10 mA
Product family PSRclassic
Contact material AgSnO2
Housing material Polyamide
Maximum altitude ≤ 2000 m (Above sea level)
Number of inputs 2
Stripping length 8 mm
Connection method Push-in connection
Mounting position vertical or horizontal
Number of outputs 5
Sq. Total current 72 A2(observe derating)
Switching voltage min. 10 V
Output description 2 N/O contacts each in series, safety-related, floating
Protective circuit Suppressor diode
Switching capacity min. 100 mW
Current consumption typ. 39 mA
Switching frequency max. 1 Hz
Degree of protection IP20
Typical release time < 20 ms (at Us / when controlled via A11/A12)
Assembly instructions Observe derating
Standards/regulations EN 60947-1
Vibration (operation) 10 Hz ... 150 Hz, amplitude 0.15 mm, 2g
Contact switching type 5 enabling current paths
Nominal operating mode 100% operating factor
Performance level (PL) e (In conjunction with suitable evaluating device)
Mechanical service life approx. 107cycles
Description of the input safety-related
Rated insulation voltage 250 V
Operating voltage display 2 x green LED
Typ. starting time with Us < 25 ms (at Us / when controlled via A11/A12)
Conductor cross-section AWG 24 ... 16
Limiting continuous current 6 A (observe derating)
Maximum switching frequency 1 Hz
Safety Integrity Level (SIL) 3 (In conjunction with suitable evaluating device)
Conductor cross section rigid 0.2 mm² ... 1.5 mm²
Input voltage range "1" signal 19.2 V ... 26.4 V DC
Rated surge voltage/insulation See section “Insulation coordination”
Ambient temperature (operation) -20 °C ... 55 °C (observe derating)
Conductor cross section flexible 0.2 mm² ... 1.5 mm²
Ambient temperature (storage/transport) -40 °C ... 70 °C
Min. degree of protection of inst. location IP54
Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing)
Max. permissible overall conductor resistance 50 Ω
Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing)
Maximum power dissipation for nominal condition 16.7 W (US= 26.4 V, IL² = 72 A², PTotal max= 1.4 W + 14.4 W)
Switching capacity in accordance with IEC 60947-5-1 3 A (AC15)
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6)

Descrição do produto

Single-channel or two-channel contact extension, 5 N/O contacts, 1 N/C contact, 1 confirmation current path, together with basic device up to Cat. 4 PL e in accordance with EN ISO 13849 safe isolation
Principais características
  • Qualidade de nível industrial
  • Em conformidade com a RoHS
  • Certificado CE
  • Garantia de 1 ano

Documentos do produto

Ficha de dados

Especificações técnicas e dados de desempenho

Manual do Usuário

Guia de instalação e operação

Top