Em estoque Produto em alta
PTFIX 6/12X2,5 GNYE
PTFIX 6/12X2,5 GNYE 1091671 PHOENIX CONTACT Block for distribution, Terminal base with power, The blocks can..
$0.00
USD
3681 em estoque
Especificações principais
:
For power distribution applications, IEC 60364-4-43.2008; modified + corrigendum Okt. 2008 (DIN VDE 0100-430:2010-10) section 433.2 ff must be observed!
Note:
The maximum load current of a single clamping unit must not be exceeded.
Color:
green/yellow
Depth:
21.7 mm
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| For power distribution applications, IEC 60364-4-43.2008; modified + corrigendum Okt. 2008 (DIN VDE 0100-430:2010-10) section 433.2 ff must be observed! | |
| Note | The maximum load current of a single clamping unit must not be exceeded. |
| Color | green/yellow |
| Depth | 21.7 mm |
| Width | 41 mm |
| Height | 28.6 mm |
| Result | Test passed |
| General | the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories |
| Spectrum | Service life test category 2, bogie-mounted |
| ASD level | 6.12 (m/s²)²/Hz |
| Frequency | f1= 5 Hz to f2= 250 Hz |
| Potentials | 1 |
| Pulse shape | Half-sine |
| Acceleration | 3.12g |
| Product type | Distributor terminal block |
| Mounting type | for snapping onto a DIN rail adapter |
| Specification | DIN EN 50155 (VDE 0115-200):2008-03 |
| Number of rows | 1 |
| Shock duration | 18 ms |
| Nominal current | 41 A (with 6 mm² conductor cross section) |
| Nominal voltage | 450 V |
| Open side panel | No |
| Test directions | X-, Y- and Z-axis |
| Service Entrance | yes |
| Stripping length | 10 mm ... 12 mm |
| Time of exposure | 30 s |
| Cross section AWG | (converted acc. to IEC) |
| Degree of pollution | 3 |
| Insulating material | PA |
| Rated surge voltage | 6 kV |
| Maximum load current | 57 A (with 10 mm² conductor cross section) |
| Overvoltage category | III |
| Maximum total current | 57 A (with 10 mm² conductor cross section) |
| Nominal cross section | 2.5 mm² |
| Number of connections | 13 |
| Test duration per axis | 5 h |
| DIN rail/fixing support | NS 35/NS 15 |
| Rated cross section AWG | 14 |
| Insulating material group | I |
| Internal cylindrical gage | A3 |
| Conductor cross section rigid | 0.5 mm² ... 10 mm² |
| Ambient temperature (assembly) | -5 °C ... 70 °C |
| Number of shocks per direction | 3 |
| Ambient temperature (actuation) | -5 °C ... 70 °C |
| Number of connections per level | 13 |
| Conductor cross section flexible | 0.5 mm² ... 10 mm² |
| Connection in acc. with standard | IEC 60998-2-2 |
| Conductor cross section, rigid [AWG] | 24 ... 12 (converted acc. to IEC) |
| Flammability rating according to UL 94 | V0 |
| Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
| Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Conductor cross section, flexible [AWG] | 20 ... 10 (converted acc. to IEC) |
| Permissible humidity (storage/transport) | 30 % ... 70 % |
| Surface flammability NFPA 130 (ASTM E 162) | passed |
| Static insulating material application in cold | -60 °C |
| Maximum power dissipation for nominal condition | 0.77 W |
| Calorimetric heat release NFPA 130 (ASTM E 1354) | 28 MJ/kg |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
| Flexible conductor cross section (ferrule with plastic sleeve) | 0.5 mm² ... 6 mm² |
| Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
| Conductor cross-section flexible (ferrule without plastic sleeve) | 0.5 mm² ... 6 mm² |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
| Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and plastic sleeve) | 0.5 mm² ... 1.5 mm² |
Descrição do produto
Distribution block, Base terminal with power, nominal voltage: 450 V, nominal current: 24 A, number of connections: 13, connection type: Push-in connection, Branch, section: 0.14 mm² - 4 mm², Push-in
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
