Em estoque Produto em alta
SACC-M12FSD-4QO SH ETH
SACC-M12FSD-4QO SH ETH 1411069 PHOENIX CONTACT Connector
$0.00
USD
4175 em estoque
Especificações principais
:
0.14 mm² ... 0.34 mm² (solid)
Coding:
D
Length:
57 mm
Shielded:
yes
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| 0.14 mm² ... 0.34 mm² (solid) | |
| Coding | D |
| Length | 57 mm |
| Shielded | yes |
| Application | Data |
| Head design | Socket |
| Sensor type | Ethernet |
| Cable outlet | straight |
| Product type | Circular connector (cable-side) |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Seal material | NBR |
| Article revision | 04 |
| Contact material | CuSn |
| Diameter housing | 19 mm |
| Head thread type | M12 |
| Outside diameter | 5 mm ... 9.7 mm |
| Connection method | Insulation displacement connection |
| Head cable outlet | straight |
| Tightening torque | 5 Nm (Pressure nut) |
| Nominal current IN | 4 A |
| Nominal voltage UN | 48 V AC |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 4 |
| Rated surge voltage | 0.8 kV |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Signal type/category | Ethernet CAT5 (based on IEC 11801), 100 Mbps |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | Zinc die-cast, nickel-plated |
| Standards/regulations | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Wrench size, union nut | 15 mm |
| Connection cross section | 0.14 mm² ... 0.34 mm² (flexible) |
| Contact carrier material | PA 6.6 |
| Contact surface material | Ni/Au |
| Standards/specifications | according to IEC 61076-2-101 |
| Wire insulation material | PVC / PE / PP / rubber |
| Insertion/withdrawal cycles | ≥ 100 |
| Connection cross section AWG | 26 ... 22 (flexible) |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (assembly) | -5 °C ... 50 °C |
| Ambient temperature (operation) | -40 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
| Contact Color (signal designation) Contact (optional) | 1 = WHOG |
Descrição do produto
Data connectors, CAT5 Ethernet (100 MBit/s), 4-pole, halogen-free, shielded, Straight connection female M12, D, Sliding connection. insulation, knurling material: Zinc die-casting, nickel-plated, wire
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
