Em estoque Produto em alta
VAL-MS 500 ST
VAL-MS 500 ST 2807609 PHOENIX CONTACT Type 2 surge protection plug
$0.00
USD
4028 em estoque
Especificações principais
GTIN:
4017918075293
Orderkey:
2807609
Catalog page:
Page 61 (C-4-2017)
Packing unit:
10 pc
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4017918075293 |
| Orderkey | 2807609 |
| Catalog page | Page 61 (C-4-2017) |
| Packing unit | 10 pc |
| Note (General) | Usable in all low-voltage systems between L-N or L-PEN.Only usable in IT Systems between L-PE, if the exposed-conductive-parts (bodies) of the equipment of the low-voltage installation is connected to the earthing arrangement of the transformer substation. (interconnected earthing arrangement of the HV-transformer substation with the bodies of the LV-installation. RE= RAaccordance to IEC 60364-4-442 / VDE 0100-442 Fig. 44D / Example a) |
| Country of origin | DE (Germany) |
| (UL specifications) | EN 61643-11 2012 |
| Custom tariff number | 85363010 |
| (Ambient conditions) | L-PEN |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| (Additional descriptions) | 762 V AC (120 min / withstand mode) |
| Color (Ambient conditions) | jet black RAL 9005 |
| SPD Type (Connection data) | 4CA |
| Depth (Key Commercial Data) | 55.3 mm |
| Width (Key Commercial Data) | 17.5 mm |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 52.4 mm |
| Nom. voltage (Connection data) | 500 V AC |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Degree of protection (Dimensions) | IP20 |
| Mounting type (Ambient conditions) | on base element |
| Vibration (operation) (Dimensions) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Nominal frequency (Connection data) | 50/60 Hz |
| Mode of protection (Connection data) | L-N |
| Weight per Piece (excluding packing) | 60.340 g |
| Housing material (Ambient conditions) | PA 6.6 |
| Connection method (Protective circuit) | pluggable |
| Horizontal pitch (Key Commercial Data) | 1 Div. |
| Mode of protection (Ambient conditions) | L-PE |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 1 |
| Standards/regulations (UL specifications) | IEC 61643-11 2011 |
| Response time tA (Additional descriptions) | ≤ 25 ns |
| Power distribution system (Connection data) | Single phase |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TN |
| IEC test classification (Ambient conditions) | II |
| Nominal voltage UN (Additional descriptions) | 400/690 V AC (TN) |
| TOV behavior at UT (Additional descriptions) | 690 V AC (5 s / withstand mode) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Nominal frequency fN (Additional descriptions) | 50 Hz (60 Hz) |
| Residual current IPE (Additional descriptions) | ≤ 0.45 mA |
| Residual voltage Ures (Additional descriptions) | ≤ 2.7 kV (at In) |
| Nominal discharge current In(L-N) (Connection data) | 10 kA |
| Surge protection fault message (Ambient conditions) | optical |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Measured limiting voltage MLV (L-N) (Connection data) | 2370 V |
| Voltage protection level Up (Additional descriptions) | ≤ 2.7 kV |
| Standby power consumption PC (Additional descriptions) | ≤ 250 mVA |
| Maximum continuous voltage UC (Additional descriptions) | 600 V AC |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Short-circuit current rating ISCCR (Additional descriptions) | 25 kA |
| Distance between live and grounded parts (Ambient conditions) | 5 mm |
| Max. backup fuse with branch wiring (Additional descriptions) | 125 A (gG) |
| Nominal discharge current In(8/20) µs (Additional descriptions) | 15 kA |
| Maximum continuous operating voltage MCOV (L-N) (Connection data) | 600 V AC |
| Maximum discharge current Imax(8/20) µs (Additional descriptions) | 30 kA |
| Arrester can be tested with CHECKMASTER from software version: (Ambient conditions) | From SW rev. 1.10 |
Descrição do produto
Plug-in type 2 surge protection with high-power varistor for VAL-MS base element, with thermal control, optical fault indication. Execution: 500 V AC
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
