Em estoque Produto em alta
VAL-MS 600DC-PV/2+V
VAL-MS 600DC-PV/2+V 2800642 PHOENIX CONTACT Surge arrester for 2-pos. isolated 600 V DC voltage systems, for..
$0.00
USD
3717 em estoque
Especificações principais
:
PV T2
Note:
The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area.
Type:
DIN rail module, two-section, divisible
Color:
jet black RAL 9005
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| PV T2 | |
| Note | The device is intended for touch proof installation in a housing. Ensure that there is a gap of at least 8 mm between the active and grounded parts in the connection area. |
| Type | DIN rail module, two-section, divisible |
| Color | jet black RAL 9005 |
| Depth | 65.5 mm |
| Width | 53.4 mm |
| Height | 90 mm |
| Altitude | ≤ 2000 m (amsl (above mean sea level)) |
| SPD Type | 4 (for Type 2 photovoltaic applications) |
| SPD design | Voltage-limiting type |
| Nom. voltage | 670 V AC |
| Screw thread | M5 |
| Accessibility | Accessible |
| Mounting type | DIN rail: 35 mm |
| Number of ports | One |
| Horizontal pitch | 3 Div. |
| Housing material | PA 6.6-FR |
| Pollution degree | 2 |
| Stripping length | 16 mm |
| Connection method | Screw connection |
| Shock (operation) | 60g (Half sine/11 ms/3x XYZ) |
| Tightening torque | 4.5 Nm |
| Mode of protection | (L+) - (L-) |
| Degree of protection | IP20 (only when all terminal points are used) |
| Residual current IPE | ≤ 20 µA DC |
| SPD failure behavior | OCM (Open-circuit mode) |
| Installation location | Inside |
| Rated load current IL | 80 A |
| Vibration (operation) | 7.5g (5-500 Hz/2.5 h/XYZ) |
| IEC test classification | PV T2 |
| Connection configuration | Y configuration |
| Response time tA(L-) -PE | ≤ 25 ns |
| Standards/specifications | EN 50539-11 2013 |
| Power distribution system | 1 |
| Response time tA(L+) - PE | ≤ 25 ns |
| Insulation resistance Riso | > 5 GΩ (at 500 V DC) |
| Conductor cross section AWG | 15 ... 2 |
| Open circuit voltage UOCSTC | ≤ 670 V DC |
| Response time tA(L+) - (L-) | ≤ 25 ns |
| Standby power consumption PC | ≤ 20 mVA |
| Residual voltage Ures(L+) - PE | ≤ 2.7 kV (at In) |
| Residual voltage Ures(L-) - PE | ≤ 2.7 kV (at In) |
| Surge protection fault message | optical |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Permissible humidity (operation) | 5 % ... 95 % |
| Residual voltage Ures(L+) - (L-) | ≤ 2.7 kV (at In) |
| Continuous operating current ICPV | 20 µA |
| Conductor cross section solid max. | 35 mm² |
| Conductor cross section solid min. | 1.5 mm² |
| Short-circuit current rating ISCPV | 1000 A |
| Nominal discharge current In(L+) - G | 20 kA |
| Nominal discharge current In(L-) - G | 20 kA |
| Voltage protection level Up(L+) - PE | ≤ 2.7 kV |
| Voltage protection level Up(L-) - PE | ≤ 2.7 kV |
| Conductor cross section flexible max. | 25 mm² |
| Conductor cross section flexible min. | 1.5 mm² |
| Voltage protection rating VPR (L-) -G | 2.5 kV |
| Flammability rating according to UL 94 | V-0 |
| Voltage protection level Up(L+) - (L-) | ≤ 2.7 kV |
| Voltage protection rating VPR (L+) - G | 2.5 kV |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Nominal discharge current In(L+) - (L-) | 20 kA |
| Distance between live and grounded parts | 8 mm |
| Maximum continuous operating voltage UCPV | 800 V DC |
| Total discharge current ITotal(8/20) µs | 40 kA |
| Voltage protection rating VPR (L+) - (L-) | 2.5 kV |
| Installation location of the disconnect device | Internal |
| Nominal discharge current In(8/20) µs (L+) - PE | 15 kA |
| Nominal discharge current In(8/20) µs (L-) - PE | 15 kA |
| Maximum continuous operating voltage MCOV (L+) - G | 800 V DC |
| Maximum continuous operating voltage MCOV (L-) - G | 800 V DC |
| Maximum discharge current Imax(8/20) µs (L+) - PE | 40 kA |
| Maximum discharge current Imax(8/20) µs (L-) - PE | 40 kA |
| Nominal discharge current In(8/20) µs (L+) - (L-) | 15 kA |
| Maximum discharge current Imax(8/20) µs (L+) - (L-) | 40 kA |
| Maximum continuous operating voltage MCOV (L+) - (L-) | 800 V DC |
Descrição do produto
Surge protection device for isolated and grounded 2-pole photovoltaic 600 V DC direct current systems, for rail mounting, 3-pole base element, three plug-in protection elements with temperature contro
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
