Em estoque Produto em alta
VAL-MS 800/30 VF/FM
VAL-MS 800/30 VF/FM 2805402 PHOENIX CONTACT Type 2 surge arrester
$0.00
USD
3704 em estoque
Especificações principais
GTIN:
4046356498821
Orderkey:
2805402
Catalog page:
Page 56 (C-4-2017)
Packing unit:
1 pc
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4046356498821 |
| Orderkey | 2805402 |
| Catalog page | Page 56 (C-4-2017) |
| Packing unit | 1 pc |
| Note (General) | For use in all low-voltage systems between L-PEN.Only for use in IT systems between L-PE if the bodies of the equipment in the low-voltage system are connected to the grounding system of the transformer station. (common grounding of the HV transformer station and the bodies of the LV consumer's installation. RE= RAaccording to IEC 60364-4-442/VDE 0100-442 Figure 44D/example a) |
| Country of origin | DE (Germany) |
| (Connection data) | EN 61643-11 2012 |
| Custom tariff number | 85363010 |
| (Ambient conditions) | PBT |
| (Protective circuit) | 1 A DC |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| (Additional descriptions) | ≤ 2.3 kV (at 3 kA) |
| Color (Ambient conditions) | jet black RAL 9005 |
| Depth (Key Commercial Data) | 65.7 mm (incl. DIN rail 7.5 mm) |
| Width (Key Commercial Data) | 35.6 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 96.8 mm |
| (Indicator/remote signaling) | 4.5 Nm (25 mm² ... 35 mm²) |
| Shock (operation) (Dimensions) | 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Degree of protection (Dimensions) | IP20 (only when all terminal points are used) |
| Screw thread (Protective circuit) | M2 |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Weight per Piece (excluding packing) | 244.200 g |
| Housing material (Ambient conditions) | PA 6.6 |
| Stripping length (Protective circuit) | 7 mm |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Connection method (Protective circuit) | Plug-in/screw connection via COMBICON |
| Horizontal pitch (Key Commercial Data) | 2 Div. |
| Operating current (Protective circuit) | 5 mA AC ... 1.5 A AC |
| Operating voltage (Protective circuit) | 5 V AC ... 250 V AC |
| Tightening torque (Protective circuit) | 0.25 Nm |
| Mode of protection (Ambient conditions) | L-PE |
| Standards/regulations (Connection data) | IEC 61643-11 2011 |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 2 |
| Screw thread (Indicator/remote signaling) | M5 |
| Response time tA (Additional descriptions) | ≤ 100 ns |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TN |
| IEC test classification (Ambient conditions) | II |
| Nominal voltage UN (Additional descriptions) | 400/690 V AC (TN-C) |
| TOV behavior at UT (Additional descriptions) | 1550 V AC (5 s / withstand mode) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Connection method (Indicator/remote signaling) | Fork-type cable lug |
| Nominal frequency fN (Additional descriptions) | 50 Hz (60 Hz) |
| Residual current IPE (Additional descriptions) | ≤ 3 µA |
| Tightening torque (Indicator/remote signaling) | 3 Nm (1,5 mm² ... 16 mm²) |
| Rated load current IL (Additional descriptions) | 80 A |
| Residual voltage Ures (Additional descriptions) | ≤ 3 kV (at In) |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Voltage protection level Up (Additional descriptions) | ≤ 5 kV |
| Standby power consumption PC (Additional descriptions) | ≤ 3 mVA |
| Maximum continuous voltage UC (Additional descriptions) | 800 V AC |
| Conductor cross section AWG (Indicator/remote signaling) | 15 ... 2 |
| Conductor cross section solid (Indicator/remote signaling) | 1.5 mm² ... 35 mm² |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Short-circuit current rating ISCCR (Additional descriptions) | 25 kA |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 16 mm² |
| Distance between live and grounded parts (Ambient conditions) | 8 mm |
| Max. backup fuse with branch wiring (Additional descriptions) | 100 A (gG) |
| Nominal discharge current In(8/20) µs (Additional descriptions) | 15 kA |
| Maximum discharge current Imax(8/20) µs (Additional descriptions) | 30 kA |
| Max. backup fuse with V-type through wiring (Additional descriptions) | 80 A (gG) |
| Front of wave sparkover voltage at 6 kV (1.2/50) µs (Additional descriptions) | ≤ 5 kV |
Descrição do produto
Surge arrester composed of 2-channel base element with remote indication contact and varistor line-switched plug-in protections and gas-filled arc arrester.
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
