Em estoque Produto em alta
VAL-SEC-T2-3C-175-FM
VAL-SEC-T2-3C-175-FM 2905353 VAL‐CP‐3C‐175 2859466 PHOENIX CONTACT Type 2 surge arrester
$0.00
USD
4892 em estoque
Especificações principais
GTIN:
4046356948258
Orderkey:
2905353
(General):
63 A (gG / TWIN ferrule 2x 10mm²)
Catalog page:
Page 48 (C-4-2017)
Informações do fornecedor
Produtos: 0
Geralmente enviado em 2 a 3 dias úteis.
Qualidade garantida
Envio rápido
Suporte técnico
Especificações técnicas
| Parâmetro | Valor |
|---|---|
| GTIN | 4046356948258 |
| Orderkey | 2905353 |
| (General) | 63 A (gG / TWIN ferrule 2x 10mm²) |
| Catalog page | Page 48 (C-4-2017) |
| Packing unit | 1 pc |
| Country of origin | DE (Germany) |
| (Connection data) | L-N |
| Custom tariff number | 85363030 |
| (Ambient conditions) | PBT-FR |
| (Protective circuit) | 1 A DC (30 V DC) |
| (UL connection data) | EN 61643-11 2012 |
| Altitude (Dimensions) | ≤ 2000 m (amsl (above mean sea level)) |
| Type (Ambient conditions) | DIN rail module, two-section, divisible |
| Color (Ambient conditions) | light grey RAL 7035 |
| Response time tA (General) | ≤ 25 ns |
| SPD Type (Connection data) | 4CA |
| Depth (Key Commercial Data) | 74.5 mm (incl. DIN rail 7.5 mm) |
| Width (Key Commercial Data) | 37.3 mm |
| EN type (Ambient conditions) | T2 |
| Height (Key Commercial Data) | 97.9 mm |
| Nominal voltage UN (General) | 120/208 V AC (TN-C) |
| TOV behavior at UT (General) | 240 V AC (5 s / withstand mode) |
| Nom. voltage (Connection data) | 120/208 V AC |
| Nominal frequency fN (General) | 50 Hz (60 Hz) |
| Shock (operation) (Dimensions) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Rated load current IL (General) | 40 A (Biconnect M4 fork-type cable lug 6 mm²) |
| Residual voltage Ures (General) | ≤ 0.85 kV (at In) |
| (UL indicator/remote signaling) | 14 ... 4 (flexible) |
| Degree of protection (Dimensions) | IP20 |
| Screw thread (Protective circuit) | M2 |
| Mounting type (Ambient conditions) | DIN rail: 35 mm |
| Vibration (operation) (Dimensions) | 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
| Nominal frequency (Connection data) | 50/60 Hz |
| Mode of protection (Connection data) | L-L |
| Weight per Piece (excluding packing) | 297.000 g |
| Housing material (Ambient conditions) | PA 6.6-FR 20% GF |
| Operating current (UL specifications) | 1 A AC |
| Operating voltage (UL specifications) | 125 V AC |
| Stripping length (Protective circuit) | 7 mm |
| Tightening torque (UL specifications) | 2 lbf-in. ... 4 lbf-in. |
| Voltage protection level Up (General) | ≤ 0.85 kV |
| Connection method (Protective circuit) | Plug-in/screw connection via COMBICON |
| Horizontal pitch (Key Commercial Data) | 2 Div. |
| Operating current (Protective circuit) | 5 mA AC ... 1 A AC |
| Operating voltage (Protective circuit) | 5 V AC ... 250 V AC |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Tightening torque (Protective circuit) | 0.25 Nm |
| Maximum continuous voltage UC (General) | 175 V AC |
| Mode of protection (Ambient conditions) | L-PEN |
| Switching function (Protective circuit) | PDT contact |
| Degree of pollution (Ambient conditions) | 2 |
| Number of positions (Ambient conditions) | 3 |
| Screw thread (Indicator/remote signaling) | M5 |
| Standards/regulations (UL connection data) | IEC 61643-11 2011 |
| Power distribution system (Connection data) | Wye |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 80 °C |
| IEC power supply system (Ambient conditions) | TN-C |
| IEC test classification (Ambient conditions) | II |
| Short-circuit current rating ISCCR (General) | 25 kA (in case of 315 A gG backup fuse) |
| Max. backup fuse with branch wiring (General) | 315 A (gG) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % |
| Stripping length (Indicator/remote signaling) | 16 mm |
| Connection method (Indicator/remote signaling) | Fork-type cable lug |
| Tightening torque (Indicator/remote signaling) | 4.5 Nm |
| Conductor cross section AWG (UL specifications) | 30 ... 14 |
| Conductor cross section AWG (Protective circuit) | 28 ... 16 |
| Nominal discharge current In(8/20) µs (General) | 20 kA |
| Tightening torque (UL indicator/remote signaling) | 40 lbf-in. ... 50 lbf-in. |
| Conductor cross section solid (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Maximum discharge current Imax(8/20) µs (General) | 40 kA |
| Nominal discharge current In(L-L) (Connection data) | 20 kA |
| Nominal discharge current In(L-N) (Connection data) | 20 kA |
| Surge protection fault message (Ambient conditions) | Optical, remote indicator contact |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C |
| Conductor cross section flexible (Protective circuit) | 0.14 mm² ... 1.5 mm² |
| Max. backup fuse with V-type through wiring (General) | 40 A (gG / Biconnect M4 fork-type cable lug, 6 mm²) |
| Measured limiting voltage MLV (L-L) (Connection data) | 2010 V |
| Measured limiting voltage MLV (L-N) (Connection data) | 1510 V |
| Conductor cross section AWG (Indicator/remote signaling) | 12 ... 4 |
| Conductor cross section solid (Indicator/remote signaling) | 2.5 mm² ... 25 mm² |
| Conductor cross section AWG (UL indicator/remote signaling) | 14 ... 2 (solid) |
| Flammability rating according to UL 94 (Ambient conditions) | V-0 |
| Conductor cross section flexible (Indicator/remote signaling) | 1.5 mm² ... 6 mm² |
| Maximum continuous operating voltage MCOV (L-L) (Connection data) | 350 V AC |
| Maximum continuous operating voltage MCOV (L-N) (Connection data) | 175 V AC |
Descrição do produto
Plug-in surge arrester according to type 2/class II, for three-phase power supply networks with PE and N routing combined in one conductor (4-conductor system: L1, L2, L3, PEN), with remote indication
Principais características
- Qualidade de nível industrial
- Em conformidade com a RoHS
- Certificado CE
- Garantia de 1 ano
Documentos do produto
Ficha de dados
Especificações técnicas e dados de desempenho
Manual do Usuário
Guia de instalação e operação
