HC-A 16-ESTC-32

Parâmetro	Valor
	D50
Type	D25
Tests	DIN VDE 0627/86
Width	23 mm
Height	31.8 mm
Length	72 mm
Series	HC-A
General	for HC-D25 / HC-D50 housing, crimp contact CK2,5-ED (crimp contacts not included in scope of supply)
Product type	Contact insert with a fixed no. of positions
Test voltage	4 kV AC
Assembly note	To ensure correct use, installation in housing with IP54 protection or better is required
Rated current	16 A
Contact diameter	2.5 mm
Contact material	Copper alloy
Contact numbering	17 - 32
Tightening torque	0.7 Nm ... 1 Nm (PE connection)
Connection profile	16+PE
Degree of pollution	3
Dimensional drawing
Number of positions	16
Rated surge voltage	4 kV
Overvoltage category	III
Connection technology	Crimp connection
Contact material type	turned
Rated voltage (III/3)	250 V
Conductor cross section	0.14 mm² ... 4 mm² (applies to stranded conductors)
Contact carrier material	PA
Contact surface material	Ag (alternatively Au)
Insertion/withdrawal cycles	≥ 500
Connection cross section AWG	20 ... 12
Drill hole distance, vertical	16 mm
Ambient temperature (operation)	-40 °C ... 125 °C (including heating up of contacts)
Drill hole distance, horizontal	66 mm
Connection in acc. with standard	IEC / EN
Constructional and testing regulations	DIN VDE 0627/86
Flammability rating according to UL 94	V0
Stripping length of the individual wire	8 mm

HEAVYCON male insert, A16 series, 16 poles, set connection, 17-32 numbering

Especificações técnicas e dados de desempenho

Guia de instalação e operação

HC-A 16-ESTC-32 1677076 PHOENIX CONTACT Contact insert